FiberMix 002-16 16-slot Modular Converter Chassis with SNMP Management

FiberMix 002-16

16-slot Modular Converter Chassis with SNMP Management

FiberMix 002-16 is 19" rack mountable 3U platform which supports two rear-loading, redundant, load-sharing, hot-swappable AC or DC power supplies. Up to 16 modular converters can be installed in the chassis, providing a CO/POP site solution for connecting up to 16 remote users (15 with SNMP function).

FiberMix 002-16 is manageable access system for providing full converge of the Last Mile with a variety of technologies, rates, interfaces and media. The system supports standard technologies G.703/704, G.SHDSL and IEEE802.3. Each card in the FiberMix 002-16 works in a point-to-point configuration opposite a remote unit with no connection to the adjacent cards.

This allows each card to support a different rate, interface or media.
All cards are hot-swappable and can be replaced without interfering with the data transmission of other cards.

User's manual

Quick start

•

Slot Number Up 16 slots for modular converters

•

Redundant Power Supply Two rear-loading, redundant, load-sharing, hot-swappable AC or DC or one AC and one DC power supplies

•

Hot-swappable power supply
FiberMix 002-16 can operate with single or dual AC or DC power supplies.
Each power supply supports a full rack of any combination of cards.
The redundant power supply can be replaced without affecting system Performance

•

Network Management : SNMP

•

Flexibility Single chassis for various modular converters with a variety of technologies, rates, interfaces and media

•

Hot-swappable modular converters
All cards are hot-swappable and can be replaced without interfering with the data transmission of other cards

•

High Reliability NEBS Compliant

•

Safety Compliance CE and UL

•

Efficient Heat dissipation Optimal structure for efficient heat dissipation

•

Real-time configuration and monitoring
The management software enables the user to change the setup configuration, get real-time alerts on system status, activate diagnostics, and receive statistics on system functionality in a graphic format

Number of slot
	16

Power supply
	Two hot-swappable AC or DC power supplies

Input power supply voltage
	AC: 85V-265V, 50/60Hz
	DC: -36V- -72V

Rated Current
	20A

Short Current Protection
	Yes

Over Current Protection
	30A

Noise
	≤ 100mVp-p

Port specification (For NMS1 Network management card) :
	CONSOLE: RJ-45 ETH (for SNMP and Telnet): RJ-45
	Cascading port: RJ45

Indicators PWR:
	for power supply
	PS1-5: PS1 for modules
	PS1-12: PS1 for 1st fan
	PS2-5: PS2 for modules
	PS2-12: PS2 for 2nd fan

Dimension
	442(W)130.5(H)350(D)mm

Power consumption
	≤ 80W (at max load)

Working ambience
	Temp: 0~50 centigrade
	RH: 5~90% non-condensing

Storage ambience
	Temp: -40~85 centigrade
	RH: 20~90% non-condensing

Safety compliance
	CE marking, UL, NEBS

FiberMix 002-16AC/S	3U, 16-slot chassis with one 115V or 230V AC
FiberMix 002-16DC/S	3U, 16-slot chassis with one -48V DC

Also see the products of this group:

G.703 E1-U/ FE1/ FE1-A Single Port E1 and Fractional E1 Access Unit

FiberMix 903-V35FE1 V.35 to E1 fractional Interface Converter

FiberMix 904-V35FE1 Module, V.35 to transparent or fractional E1 interface converter, SNMP-management

FiberMix 907-EV35 Standalone 10BaseT to V.35 Converter

FiberMix 905-EE1 Standalone 10Mbps on Transparent or Fractional E1 Converter

FiberMix 001-1 1-slot Chassis

FiberMix 002-4 4-slot Chassis (managed)

FiberMix 002-16 16-slot Modular Converter Chassis with SNMP Management

FiberMix 001-NMS1 Master Management Agent Module for 3U Chassis

FiberMix 001-NMS2 Slave Management Module for 3U Chassis

FiberMix 004-16NMS1 Master Management Agent Module for 10U Chassis

FiberMix 004-16NMS2 Slave Management Module for 10U Chassis

FiberMix 802-60 Module, 2 E1 channels optical multiplexer, SNMP-management

FiberMix 803-120 Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V, DC – 48V

FiberMix 805-120B Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V, DC –48V

FiberMix 804-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX

FiberMix 806-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX

FiberMix 803-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-240B Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 2304-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, AC 115V or 230V, DC – 48V

FiberMix 2504-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, AC 115V or 230V, DC –48V

FiberMix 2401-30, FiberMix 2601-30 Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port

FiberMix 2401-60, FiberMix 2601-60 Module- PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 2 E1 ports and 1 Fast-Ethernet port

FiberMix 3100-155 SDH Multi-Service multiplexer

If you need further information, please fill out this form below

What kind of information would you like to receive from us?

Please fill out the contact information:
First name/Last name: *
Company: *
E-mail: *
Your phone (country/city code): *

* Indicated a required field

DYNAMIX^®