|
|
|
DYNAMIX HP- 51/S
|
| HomeCNA3.1 Coax Ethernet Bridge |
|
|
|
View Larger Picture
|
This equipment including guaranteed quality of service (QoS), low cost, robust performance, and the ability to operate over coax cables.
DYNAMIX HP- 51/S enables You to set-up your Private Network at Home with your Existing Coaxial Cable. No additional Network wiring is necessary. You may just Find a Coax Connector in the wall, put the coaxial plug into the connector, you can then be ready to access the broadband Internet
(at connection to HomeCNA3.1 Coax MDU Master Bridge
- DYNAMIX HP- 51/M). No extra utility is needed. No setting, just link. Simply Plug & Play.
Via the RJ-45 Ethernet Ports, You can connect DYNAMIX HP- 51/S with the Ethernet
- Interfaced Devices such as STB, Camera Server, PC, or Switch/Hub.
The High speed of 128Mbps will bring you to enjoy the “video-on-demand” or “multimedia-on-demand”
services.
|
User's manual
0.9 Mb
Quick start
|
|
|
|
| • |
HCNA Coax Port as Home Network Backbone by Using Existing Coaxial Cable |
| • |
Two 10/100M Fast Ethernet Ports |
| • |
Dynamic Attenuation Range > 50dB on RG59 |
| • |
Filter Built-in to Eliminate Noise from TV |
| • |
QoS Priority and Mapping Support |
| • |
Queuing Schemes for Variant QoS Demand |
| • |
TagVLAN Configuration |
| • |
Service and Bandwidth Control |
| • |
IGMP Snooping Control |
| • |
Intelligence for Carrier IPTV Service |
 Back to Top
|
|
|
|
|
| Networks standards |
| | HomePNA 3.1 over Coaxial Cable (HCNA) |
| | IEEE802.3 |
| | IEEE802.3u |
| | IEEE802.3x |
| Connectors |
| | Ethernet : Two RJ-45 Ports |
| | HCNA : Two F-Type Female Coax Connectors, One for HCNA, the Other One for TV |
| Transmission Power/Spectrum |
| | 0 +/- 1 dBm (or 8.5 +/- 1dBm for CES-532D) |
| | 4 ~ 20MHz (or 12~28MHz, CES-532M/CES-532D) |
| Transmission Range and Distance |
| | Dynamic Attenuation Range > 50dB |
| | Up to 4000 Feet ( -176dBm/Hz Noise Floor) on RG59 Wire |
| Quality of Service |
| | Priority Queue Based on 802.1p and TOS |
| | Guaranteed QoS based on HomePNA3.1 Parameterized QoS |
| Fast Ethernet Interface |
| | 10/100Mbps Auto Negotiation |
| | MDI/MDI-X Auto Crossover |
| Management |
| | Service Enable/Disable Control |
| | Bandwidth Control |
| | Queuing Scheme Based on 802.1p/TOS |
| | TagVLAN ID Tag/UnTag or Pass Through |
| | IGMP Snooping Control (V1 & V2) |
| | Statistics and Status of Ethernet Ports |
| Indicators |
| | "Power" LED |
| | HCNA "Link/Activity" LED |
| | Ethernet “Link/Activity” LED x 2 |
| Power Requirement |
| | External Power Supply : 5VDC |
| | Power Consumption <
4Watt |
| EMI/EMC |
| | Comply with FCC Part15 |
| | Comply with CE |
| | UL60950-1, CSA-C22.2 No.60950-1-03 |
| Environmental Conditions |
| | Operating Temperature : 0 C ~ 40 C (32 F ~ 104 F) |
| | Storage Temperature : -10 C ~ 65 C (14 F ~ 149 F) |
| | Operating Humidity : 10% ~ 95%, Non-Condensing |
| | Physical Dimension:
114mm (W) x 67mm (D) x 25mm (H) |
| | Weight: about
120 g |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
|
| DYNAMIX HP- 51/S |
HomeCNA3.1 Coax Ethernet Bridge |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
HomePNA 3.0 Switch, adapter, router
|
|
DYNAMIX HP-30/S
HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX DH-314
14-port
HomePNA 3.0 (128 Mbps) switch
(2 ports 10/100/1000 Base-TX)
|
|
HomeCNA 3.0 router, adapter
|
|
DYNAMIX HP- 51/M
HomeCNA3.1 Coax MDU Master Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 51/S HomeCNA3.1 Coax Ethernet Bridge
(2 ports 10/100 Base-TX)
|
|
DYNAMIX HP-31/S
HCNA (HomePNA 3.1 over Coax) to Ethernet Bridge
(2 ports 10/100 Base-TX)
|
|
|
