|
|
|
DYNAMIX HP-32/S(FE)
|
| HCNA
(HomePNA 3.1 over Coax) to Fast Ethernet Bridge {256Mbps} |
|
DYNAMIX HP-32/S(GE)
|
| HCNA (HomePNA 3.1 over Coax) to Gigabit Ethernet Bridge {256Mbps} |
|
|
|
DYNAMIX HP-32/S enables You to set-up your Private Network at Home with your Existing Coaxial Cable. No additional Network wiring is necessary. You may just Find a Coax Connector in the wall, put the coaxial plug into the connector, you can then be ready to access the broadband Internet.
DYNAMIX HP-32/S including guaranteed quality of service (QoS), low cost, robust performance, and the ability to operate simultaneously over coax cables. DYNAMIX HP-32/S support TAGVLAN, QUEUING SCHEME and IGMP SNOOPING to help deployment of services.
Via the RJ-45 Ethernet Ports, You can connect DYNAMIX HP-32/S with the Ethernet - Interfaced Devices such as STB, Camera Server, PC, or Switch/Hub. The High speed of 256Mbps will bring you to enjoy the “video-on-demand” or “multimedia-on-demand” services.
DYNAMIX HP-32/S(FE) has 2 * 10/100M Ethernet ports, and HP-32/S(GE) - 2 * 10/100/1000M Ethernet ports.
With DYNAMIX HP-32/S you can even quickly extend or flexibly change the existing LAN environment
|
User's manual
Quick start
Data
Sheet
Dynamix HP-32/S(FE)
Data Sheet
Dynamix HP-32/S(GE)
|
|
|
|
| • |
Using existing coaxial cable to build a home network |
| • |
Shares high speed Internet access and streaming video |
| • |
1 port 256 Mbps connection compliant with HomePNA 3.1 over Coax (HCNA) standard |
| • |
1 port for TV |
| • |
2 * 10/100 Base TX Fast Ethernet ports for connecting to Ethernet or cable modem - DYNAMIX HP-32/S (FE) |
| • |
2 * 10/100/1000 Base TX Gigabit Ethernet ports for connecting to Ethernet or cable modem DYNAMIX HP-32/S (GE) |
| • |
10/100 (10/100/1000) Mbps Auto-Negotiation Support |
| • |
Energy Efficiency (Green) Ethernet Support |
| • |
Attenuation Range > 50dB |
| • |
QoS Priority and Mapping Support |
| • |
802.1q TagVLAN Support |
| • |
IGMP Snooping Control |
| • |
Distance up to 1200 m over RG 59 wires |
| • |
Signal Quality Indication |
| • |
Filter Built-in to Eliminate Noise from TV |
| • |
Better Compatibility with CATV/Satellite Signal |
| • |
Compact Size Design |
 Back to Top
|
|
|
|
|
| Networks standards |
| | HomePNA 3.1 over Coaxial Cable
(HCNA) |
| | IEEE 802.3 10M Ethernet |
| | IEEE 802.3u 100M Fast Ethernet |
| | IEEE 802.3x Flow Control |
| | IEEE 802.3az Energy Efficiency Ethernet |
| Connectors |
| | Ethernet : Two RJ-45 Ports |
| | HCNA: Two F-Type Female Coax Connectors, One for HCNA, the Other for TV |
| Transmission Power/Spectrum |
| | -2 ~ +1 dBm |
| | 12 - 44MHz |
| Transmission Range and Distance |
| | Data Rate Up to
256 Mbps |
| | Attenuation Range > 50dB |
| | Up to 4000 Feet (-155dBm/Hz Noise Floor) on RG59 Wire |
| Ethernet Interface |
| | 10/100 Mbps Auto Negotiation - DYNAMIX
HP-32/S (FE) |
| | 10/100/1000 Mbps Auto Negotiation - DYNAMIX HP-32/S (GE) |
| | MDI/MDI-X Auto Crossover |
| Quality of Service |
| | Priority Mapping Based on IEEE 802.1p |
| | Guaranteed QoS based on HomePNA3.1 Parameterized QoS |
| Feature Support |
| | Queuing Scheme Based on 802.1p/TOS |
| | 802.1q TagVLAN Support |
| | IGMP Snooping Control (V1 & V2 & V3) |
| | Statistics and Status |
| Indicators |
| | “Power” LED |
| | HCNA “Link/Activity/Quality” LED |
| | Ethernet “Link/Activity” LED *2 |
| Power Requirement |
| | External Power Supply : 5~12 VDC |
| | Power Consumption :
• < 3 Watts DYNAMIX HP-32/S (FE)
• < 4 Watts DYNAMIX HP-32/S (GE) |
| EMI/EMC |
| | Comply with FCC Part 15 and VCCI |
| | Comply with CE |
| Environmental Conditions |
| | Operating Temperature : 0°C- 50°C (32°F ~ 120°F) |
| | Storage Temperature : –10°C ~ 65°C (14°F ~ 149°F) |
| | Operating Humidity : 10% ~ 95%, Non-condensing |
| | Physical Dimension:
130mm (W) x 95mm (D) x 32mm (H) |
| | Weight: about
160 g |
|
|
Back to Top
|
|
|
|
| DYNAMIX HP- 32/S(FE) |
HCNA (HomePNA 3.1 over Coax) to Fast Ethernet Bridge {256Mbps} |
| DYNAMIX HP- 32/S(GE) |
HCNA (HomePNA 3.1 over Coax) to Gigabit Ethernet Bridge {256Mbps} |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
HomePNA 3.0 Switch, adapter, router
|
|
DYNAMIX HP-30/S
HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX DH-314
14-port
HomePNA 3.0 (128 Mbps) switch
(2 ports 10/100/1000 Base-TX)
|
|
HomeCNA 3.0 router, adapter
|
|
DYNAMIX HP-31/S
HCNA (HomePNA 3.1 over Coax) to Ethernet Bridge
(2 ports 10/100 Base-TX)
|
|
DYNAMIX HP-32/S(FE) HCNA
(HomePNA 3.1 over Coax) to Fast Ethernet Bridge {256Mbps}
|
|
DYNAMIX HP-32/S(GE) HCNA (HomePNA 3.1 over Coax) to Gigabit Ethernet Bridge {256Mbps}
|
|
DYNAMIX HP- 51/M
HomeCNA3.1 Coax MDU Master Bridge
(2 ports 10/100 Base-TX) (128Mbps)
|
|
DYNAMIX HP- 51/S HomeCNA3.1 Coax Ethernet Bridge
(2 ports 10/100 Base-TX) (128Mbps)
|
|
DYNAMIX HP- 52/M
HomeCNA3.1 Coax MDU Master Bridge
(2 ports 10/100/1000 Base-TX) (224Mbps)
|
|
DYNAMIX HP- 52/S HomeCNA3.1 Coax Ethernet Bridge
(2 ports 10/100 Base-TX) (224Mbps)
|
|
|
