|
DYNAMIX UM-A Plus New!
|
Universal
ADSL 2+ modem/router (24 Mbps / 1 Mbps) with Ethernet port and Firewall support |
|
|
|
|
|
|
|
• |
Compliant to ANSI T1.413 Issue 2, ITU-T G.992.1 and ITU-T G.992.2 , ITU-G.992.3 , ITU 992.4 standards . |
• |
ITU G.992.5 and READSL 2 standards |
• |
Fully compliant with Annex A/B/B(U-R2) ADSL
specifications. |
• |
Downstream and Upstream data rates up to 24Mbps and 1Mbps. |
• |
Support ATMover ADSL |
• |
Friendly GUI Configuration and Management software |
• |
PPPoE/PPP protocol for dial-up ADSL
service. |
• |
Support Firewall
functionalities. |
• |
Support UPnP functionality |
• |
Support Universal serial Bus-USB 1.1 |
|
Web-based setup for installation and
management. |
|
Support packet filtering
functionality. |
|
Flash memory for firmware
upgrade. |
|
Hardware Reset button for fast default setting
recovery. |
• |
LEDs indicator indicates connection
status. |
Back to Top
|
|
|
|
ADSL standards |
| Full rate ANSI T1.413 Issue2, ITU-T G.992.1 and ITU-T G.992.2 , G.992.3, G.992.4, G.992.5 standards
compliant. |
| Support digital loopback ITU G.992.3
(annex I and J) standards compliant |
ATM protocols |
| Routed IP over over ATM /Ethernet over ATM ( RFC1483 ). |
| PPP over ATM (RFC 2364) |
| Classical IP over ATM ( RFC1577 ). |
| PPP over Ethernet clients
(RFC 2516) |
| CBR / UBR , VBR-rt è VBR-nt Traffic Shaping QoS |
| ATM ALLO, ALL2 and AAL5. |
Bridge mode |
| IEEE 802.1D Transparent Bridgin |
| Support up to 128 MAC Address |
Router mode |
| IP Routing – RIPv1 and RIPv2. and
Static Routing. |
| DHCP Server and
Client. |
| Support DMZ. |
| Support NAT and NAPT
functionality. |
| Support IPSec, L2TP, PPTP
Pass-Through |
| Support SNMP
functionality. |
| Support ICMP |
Firewall |
| Support Statefull Packet Inspection ( SPI ). |
| Support DoS ( Denial of Service )
protection. |
| Support Service
Filtering. |
| Support IP Sec Pass Through |
| Support MAC
filtering, Web filtering and IP filtering |
Web-Based Management |
| Firmware upgrade via
FTP. |
| Restore factory default setting via Web or hardware reset
button. |
| WAN and LAN connection
statistics. |
| Configuration of static routes and routing
table, NAT/NAPT and VCs. |
| PPP user ID and
password. |
| Support Access
Policies. |
OS Support |
| Windows 95, 98, ME, 2000, NT4.0, XP, Mac, UNIX & Linux |
Certification |
| FCC part 15 & 68, CE mark |
Interface |
| LAN: 10/100Base-T auto sensing Ethernet port through RJ-45 connector |
| ADSL: ADSL line through RJ-11 connector |
| Console Port: DB9 RS-232 connector |
Power Supply |
| 6W max. through 9VDC |
| 1000mA power adaptor |
Dimension |
| Size (app.): 127 mm(width) x 75 mm (depth) x 16 mm (height) |
| Net weight (app.): 400g |
Environment |
| Operating temperature 0°C ~ 45°C ambient |
| Humidity 5 % ~ 95 %
(non-condensing) |
| Storage temperature -20°C ~ 60°C |
|
Back to Top
|
|
|
|
DYNAMIX UM-A Plus |
Universal ADSL2+ modem/router (24 Mbps / 1 Mbps) with Ethernet port and Firewall support |
|
Back to Top |
|
|